Package: acl
Version: 2.2.51-1.tshtgl.pp
Depends: libacl(>=2.2.51), libacl.so.1, libacl.so.1(ACL_1.0), libattr.so.1, libc.so.6, libc.so.6(GLIBC_2.4)
Section: admin
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: d3f0893ecc346b77b736cf58e9b1ad70
Size: 65600
Filename: acl_2.2.51-1.tshtgl.pp_arm.ipk
Source: http://download.savannah.gnu.org/releases/acl/acl-2.2.51.src.tar.gz
Description: Utilities for managing access control lists
This package contains a set of utilities needed for manipulating access
control lists.
Package: aespipe
Version: 2.3d-2.tshtgl.pp
Depends: /bin/bash, glibc, gnupg, libc.so.6, libc.so.6(GLIBC_2.4), sharutils
Provides: aespipe.pp
Section: misc
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: 07b0ed7c0eb052d0da524d625a388a40
Size: 45708
Filename: aespipe_2.3d-2.tshtgl.pp_arm.ipk
Source: http://loop-aes.sourceforge.net/aespipe/aespipe-v2.3d.tar.bz2
Description: An AES-encryption tool for tar/cpio
Aespipe is an AES-encryption tool, reading from standard input and writing
to standard output. It can be used to create and restore encrypted tar or
cpio archives and loop-AES compatible encrypted disk images.
Package: arpwatch-NG
Version: 1.7-5.tshtgl.pp
Depends: /bin/bash, /bin/sh, /opt/bin/perl, /opt/sbin/sendmail, glibc, libc.so.6, libc.so.6(GLIBC_2.4), libpcap, libpcap.so.0.9.8, libresolv.so.2, libresolv.so.2(GLIBC_2.4)
Provides: arpwatch-NG.pp
Section: net
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: 2bb8e7b0d03c6aad542fb08a10ee2ad4
Size: 164724
Filename: arpwatch-NG_1.7-5.tshtgl.pp_arm.ipk
Source: http://freequaos.host.sk/arpwatch/arpwatch-NG1.7.tar.bz2
Description: A monitoring tool for IP/MAC addresses on a network
Arpwatch-NG contains utilities to monitor Ethernet network traffic and build
databases of Ethernet/IP address pairs, and can report certain changes. It is
based upon the original arpwatch package.
Package: attr
Version: 2.4.46-1.tshtgl.pp
Depends: libattr(>=2.4.46), libattr.so.1, libattr.so.1(ATTR_1.0), libattr.so.1(ATTR_1.2), libc.so.6, libc.so.6(GLIBC_2.4)
Section: admin
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 56e52daa509a05fdd89e735926232bbf
Size: 38268
Filename: attr_2.4.46-1.tshtgl.pp_arm.ipk
Source: http://download.savannah.gnu.org/releases/attr/attr-2.4.46.src.tar.gz
Description: Utilities for managing filesystem extended attributes
This package contains a set of tools for manipulating extended attributes
on filesystem objects, in particular getfattr(1) and setfattr(1).
Package: bacula-client
Version: 5.0.3-1.tshtgl.pp
Depends: /bin/bash, bacula(>=5.0.3), gdb, libacl.so.1, libacl.so.1(ACL_1.0), libattr.so.1, libattr.so.1(ATTR_1.0), libbac-5.0.3.so, libbaccfg-5.0.3.so, libbacfind-5.0.3.so, libbacpy-5.0.3.so, libc.so.6, libc.so.6(GLIBC_2.4), libcap.so.2, libcrypto.so.0.9.8, libdl.so.2, libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), libm.so.6, libpthread.so.0, libpthread.so.0(GLIBC_2.4), libpython2.5.so.1.0, libresolv.so.2, librt.so.1, libssl.so.0.9.8, libstdc++.so.6, libstdc++.so.6(CXXABI_1.3), libutil.so.1, libwrap.so.0, libz.so.1
Provides: bpipe-fd.so
Section: misc
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 709c4a12d05c4a95fd4dff12e31f8c5e
Size: 71826
Filename: bacula-client_5.0.3-1.tshtgl.pp_arm.ipk
Description: The Bacula backup client
This package contains the Bacula File service (also known as the Client
program) which is the software program that is installed on the machine
to be backed up. It is specific to the operating system on which it runs
and is responsible for providing file attributes and data when requested
by the Director. The File services are also responsible for the file
system dependent part of restoring the file attributes and data during
a recovery operation.
Package: bacula-console
Version: 5.0.3-1.tshtgl.pp
Depends: bacula(>=5.0.3), libbac-5.0.3.so, libbaccfg-5.0.3.so, libc.so.6, libc.so.6(GLIBC_2.4), libcap.so.2, libcrypto.so.0.9.8, libdl.so.2, libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), libhistory.so.6, libm.so.6, libncurses.so.5, libpthread.so.0, libpthread.so.0(GLIBC_2.4), libreadline.so.6, libresolv.so.2, libssl.so.0.9.8, libstdc++.so.6, libstdc++.so.6(CXXABI_1.3), libwrap.so.0, libz.so.1
Section: admin
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: ae6943a96c11d2210bddaf2b0d19bedc
Size: 16591
Filename: bacula-console_5.0.3-1.tshtgl.pp_arm.ipk
Description: The Bacula command console
This package contains the Bacula Console service, which is the program
that allows the administrator or user to communicate with the Bacula
Director. It provides a text-based console interface.
Package: bacula-server-mysql
Version: 5.0.3-1.tshtgl.pp
Depends: /bin/bash, /bin/sh, /opt/bin/env, /opt/bin/python, bacula(>=5.0.3), gdb, libacl.so.1, libattr.so.1, libbac-5.0.3.so, libbaccfg-5.0.3.so, libbacfind-5.0.3.so, libbacpy-5.0.3.so, libc.so.6, libc.so.6(GLIBC_2.4), libcap.so.2, libcrypt.so.1, libcrypto.so.0.9.8, libdl.so.2, libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), libm.so.6, libmysqlclient_r.so.15, libmysqlclient_r.so.15(libmysqlclient_15), libnsl.so.1, libpthread.so.0, libpthread.so.0(GLIBC_2.4), libpython2.5.so.1.0, libresolv.so.2, librt.so.1, libssl.so.0.9.8, libstdc++.so.6, libstdc++.so.6(CXXABI_1.3), libstdc++.so.6(GLIBCXX_3.4), libutil.so.1, libwrap.so.0, libz.so.1
Provides: bacula-server, libbacsql-5.0.3.so
Conflicts: bacula-server-sqlite, bacula-server-postgresql
Section: misc
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 6d2675eb70d799648bf8683b20678b2c
Size: 1079291
Filename: bacula-server-mysql_5.0.3-1.tshtgl.pp_arm.ipk
Description: The Bacula server for MySQL backends
This package contains the Bacula server daemons which use MySQL as database
backend for the Catalog service.
The Bacula Director service is the program that supervises all the backup,
restore, verify and archive operations. The system administrator uses the
Bacula Director to schedule backups and to recover files. The Director runs
as a daemon in the background.
The Bacula Storage services consist of the software programs that perform
the storage and recovery of the file attributes and data to the physical
backup media or volumes. In other words, the Storage daemon is responsible
for reading and writing your tapes (or other storage media, e.g. files). It
runs as a daemon on the machine that has the backup device (usually a tape
drive).
Package: bacula-server-postgresql
Version: 5.0.3-1.tshtgl.pp
Depends: /bin/bash, /bin/sh, /opt/bin/env, /opt/bin/python, bacula(>=5.0.3), gdb, libacl.so.1, libattr.so.1, libbac-5.0.3.so, libbaccfg-5.0.3.so, libbacfind-5.0.3.so, libbacpy-5.0.3.so, libc.so.6, libc.so.6(GLIBC_2.4), libcap.so.2, libcrypt.so.1, libcrypto.so.0.9.8, libdl.so.2, libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), libm.so.6, libpq.so.5, libpthread.so.0, libpthread.so.0(GLIBC_2.4), libpython2.5.so.1.0, libresolv.so.2, librt.so.1, libssl.so.0.9.8, libstdc++.so.6, libstdc++.so.6(CXXABI_1.3), libstdc++.so.6(GLIBCXX_3.4), libutil.so.1, libwrap.so.0, libz.so.1
Provides: bacula-server, libbacsql-5.0.3.so
Conflicts: bacula-server-sqlite, bacula-server-mysql
Section: misc
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 84440fd9097b1415fb178fc88983969a
Size: 1082547
Filename: bacula-server-postgresql_5.0.3-1.tshtgl.pp_arm.ipk
Description: The Bacula server for PostgreSQL backends
This package contains the Bacula server daemons which use PostgreSQL as a
database backend for the Catalog service.
The Bacula Director service is the program that supervises all the backup,
restore, verify and archive operations. The system administrator uses the
Bacula Director to schedule backups and to recover files. The Director runs
as a daemon in the background.
The Bacula Storage services consist of the software programs that perform
the storage and recovery of the file attributes and data to the physical
backup media or volumes. In other words, the Storage daemon is responsible
for reading and writing your tapes (or other storage media, e.g. files). It
runs as a daemon on the machine that has the backup device (usually a tape
drive).
Package: bacula-server-sqlite
Version: 5.0.3-1.tshtgl.pp
Depends: /bin/bash, /bin/sh, /opt/bin/env, /opt/bin/python, bacula(>=5.0.3), gdb, libacl.so.1, libattr.so.1, libbac-5.0.3.so, libbaccfg-5.0.3.so, libbacfind-5.0.3.so, libbacpy-5.0.3.so, libc.so.6, libc.so.6(GLIBC_2.4), libcap.so.2, libcrypto.so.0.9.8, libdl.so.2, libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), libm.so.6, libpthread.so.0, libpthread.so.0(GLIBC_2.4), libpython2.5.so.1.0, libresolv.so.2, librt.so.1, libsqlite3.so.0, libssl.so.0.9.8, libstdc++.so.6, libstdc++.so.6(CXXABI_1.3), libstdc++.so.6(GLIBCXX_3.4), libutil.so.1, libwrap.so.0, libz.so.1
Provides: bacula-server, libbacsql-5.0.3.so
Conflicts: bacula-server-mysql, bacula-server-postgresql
Section: misc
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: d7d53281534f87dcfbc4d1f30ab4d243
Size: 1078183
Filename: bacula-server-sqlite_5.0.3-1.tshtgl.pp_arm.ipk
Description: The Bacula server for SQLite backends
This package contains the Bacula server daemons which use SQLite as database
backend for the Catalog service.
The Bacula Director service is the program that supervises all the backup,
restore, verify and archive operations. The system administrator uses the
Bacula Director to schedule backups and to recover files. The Director runs
as a daemon in the background.
The Bacula Storage services consist of the software programs that perform
the storage and recovery of the file attributes and data to the physical
backup media or volumes. In other words, the Storage daemon is responsible
for reading and writing your tapes (or other storage media, e.g. files). It
runs as a daemon on the machine that has the backup device (usually a tape
drive).
Package: bacula
Version: 5.0.3-1.tshtgl.pp
Depends: /bin/bash, /bin/sh, libc.so.6, libc.so.6(GLIBC_2.4), libcap.so.2, libcrypto.so.0.9.8, libdl.so.2, libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), libm.so.6, libm.so.6(GLIBC_2.4), libpthread.so.0, libpthread.so.0(GLIBC_2.4), libpython2.5.so.1.0, libresolv.so.2, librt.so.1, libssl.so.0.9.8, libstdc++.so.6, libstdc++.so.6(CXXABI_1.3), libutil.so.1, libwrap.so.0, libz.so.1, openssl
Provides: libbac-5.0.3.so, libbaccfg-5.0.3.so, libbacfind-5.0.3.so, libbacpy-5.0.3.so
Section: net
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: bb1d81dd5fe5cb1d35ca445ed2ca7aa8
Size: 618482
Filename: bacula_5.0.3-1.tshtgl.pp_arm.ipk
Source: http://prdownloads.sourceforge.net/sourceforge/bacula/bacula-5.0.3.tar.gz
Description: Bacula - The Network Backup Solution
Bacula is a set of computer programs that permit you to manage backup,
recovery and verification of computer data across a network of computers
of different kinds. In technical terms, it is a network client/server
based backup program. Bacula is relatively easy to use and efficient,
while offering many advanced storage management features that make it
easy to find and recover lost or damaged files.
This package contains common files required for all packages.
Package: basesystem
Version: 1.0.4-7.tshtgl.pp
Depends: chkconfig, coreutils, sysvinit
Provides: /bin/bash, /bin/sh, /opt/bin/perl, /usr/bin/perl, glibc, ld-linux.so.3, ld-linux.so.3(GLIBC_2.4), libBrokenLocale.so.1, libBrokenLocale.so.1(GLIBC_2.4), libanl.so.1, libanl.so.1(GLIBC_2.4), libc.so.6, libc.so.6(GLIBC_2.4), libcidn.so.1, libcrypt.so.1, libcrypt.so.1(GLIBC_2.4), libdl.so.2, libdl.so.2(GLIBC_2.4), libgcc_s.so.1, libgcc_s.so.1(GCC_3.0), libgcc_s.so.1(GCC_3.3), libgcc_s.so.1(GCC_3.3.1), libgcc_s.so.1(GCC_3.3.4), libgcc_s.so.1(GCC_3.4), libgcc_s.so.1(GCC_3.4.2), libgcc_s.so.1(GCC_3.5), libgcc_s.so.1(GLIBC_2.0), libm.so.6, libm.so.6(GLIBC_2.4), libnsl.so.1, libnsl.so.1(GLIBC_2.4), libnss_compat.so.2, libnss_dns.so.2, libnss_files.so.2, libnss_hesiod.so.2, libnss_nis.so.2, libnss_nisplus.so.2, libpthread.so.0, libpthread.so.0(GLIBC_2.4), libresolv.so.2, libresolv.so.2(GLIBC_2.4), librt.so.1, librt.so.1(GLIBC_2.4), libstdc++.so.6, libstdc++.so.6(CXXABI_1.3), libstdc++.so.6(GLIBCXX_3.4), libstdc++.so.6(GLIBCXX_3.4.1), libstdc++.so.6(GLIBCXX_3.4.2), libstdc++.so.6(GLIBCXX_3.4.3), libthread_db.so.1, libthread_db.so.1(GLIBC_2.4), libutil.so.1, libutil.so.1(GLIBC_2.4), perl, perl(5.8.8), perl-AnyDBM_File, perl-Attribute-Handlers, perl-AutoLoader, perl-AutoSplit, perl-B, perl-B-Asmdata, perl-B-Assembler, perl-B-Bblock, perl-B-Bytecode, perl-B-C, perl-B-C-InitSection, perl-B-C-Section, perl-B-CC, perl-B-Concise, perl-B-Debug, perl-B-Deparse, perl-B-Disassembler, perl-B-Disassembler-BytecodeStream, perl-B-Lint, perl-B-OBJECT, perl-B-Pseudoreg, perl-B-Section, perl-B-Shadow, perl-B-Showlex, perl-B-Stackobj, perl-B-Stash, perl-B-Terse, perl-B-Xref, perl-Benchmark, perl-ByteLoader, perl-CGI, perl-CGI-Carp, perl-CGI-Cookie, perl-CGI-Fast, perl-CGI-Pretty, perl-CGI-Push, perl-CGI-Util, perl-CGITempFile, perl-CPAN, perl-CPAN-Author, perl-CPAN-Bundle, perl-CPAN-CacheMgr, perl-CPAN-Complete, perl-CPAN-Config, perl-CPAN-Debug, perl-CPAN-Distribution, perl-CPAN-Eval, perl-CPAN-Exception-RecursiveDependency, perl-CPAN-FTP, perl-CPAN-FTP-netrc, perl-CPAN-FirstTime, perl-CPAN-Index, perl-CPAN-InfoObj, perl-CPAN-LWP-UserAgent, perl-CPAN-Mirrored-By, perl-CPAN-Module, perl-CPAN-Nox, perl-CPAN-Queue, perl-CPAN-Shell, perl-CPAN-Tarzip, perl-CPAN-Version, perl-Carp, perl-Class-ISA, perl-Class-Struct, perl-Class-Struct-Tie_ISA, perl-Complete, perl-Config, perl-Cwd, perl-DB, perl-DB-fake, perl-DBM_Filter, perl-DBM_Filter-compress, perl-DBM_Filter-encode, perl-DBM_Filter-int32, perl-DBM_Filter-null, perl-DBM_Filter-utf8, perl-Data-Dumper, perl-Devel-DProf, perl-Devel-PPPort, perl-Devel-Peek, perl-Devel-SelfStubber, perl-Digest, perl-Digest-MD5, perl-Digest-base, perl-Digest-file, perl-DirHandle, perl-Dumpvalue, perl-DynaLoader, perl-EVERY, perl-EVERY-LAST, perl-Encode, perl-Encode-Alias, perl-Encode-Byte, perl-Encode-CJKConstants, perl-Encode-CN, perl-Encode-CN-HZ, perl-Encode-Config, perl-Encode-ConfigLocal, perl-Encode-EBCDIC, perl-Encode-Encoder, perl-Encode-Encoding, perl-Encode-Guess, perl-Encode-Internal, perl-Encode-JP, perl-Encode-JP-H2Z, perl-Encode-JP-JIS7, perl-Encode-KR, perl-Encode-KR-2022_KR, perl-Encode-MIME-Header, perl-Encode-MIME-Header-ISO_2022_JP, perl-Encode-Symbol, perl-Encode-TW, perl-Encode-UTF_EBCDIC, perl-Encode-Unicode, perl-Encode-Unicode-UTF7, perl-Encode-utf8, perl-English, perl-Env, perl-Env-Array, perl-Env-Array-VMS, perl-Errno, perl-Exporter, perl-Exporter-Heavy, perl-ExtUtils-Command, perl-ExtUtils-Command-MM, perl-ExtUtils-Constant, perl-ExtUtils-Constant-Base, perl-ExtUtils-Constant-Utils, perl-ExtUtils-Constant-XS, perl-ExtUtils-Embed, perl-ExtUtils-Install, perl-ExtUtils-Install-Warn, perl-ExtUtils-Installed, perl-ExtUtils-Liblist, perl-ExtUtils-Liblist-Kid, perl-ExtUtils-MM, perl-ExtUtils-MM_AIX, perl-ExtUtils-MM_Any, perl-ExtUtils-MM_BeOS, perl-ExtUtils-MM_Cygwin, perl-ExtUtils-MM_DOS, perl-ExtUtils-MM_MacOS, perl-ExtUtils-MM_NW5, perl-ExtUtils-MM_OS2, perl-ExtUtils-MM_QNX, perl-ExtUtils-MM_UWIN, perl-ExtUtils-MM_Unix, perl-ExtUtils-MM_VMS, perl-ExtUtils-MM_VOS, perl-ExtUtils-MM_Win32, perl-ExtUtils-MM_Win95, perl-ExtUtils-MY, perl-ExtUtils-MakeMaker, perl-ExtUtils-MakeMaker-Config, perl-ExtUtils-MakeMaker-FAQ, perl-ExtUtils-MakeMaker-Tutorial, perl-ExtUtils-MakeMaker-_version, perl-ExtUtils-MakeMaker-bytes, perl-ExtUtils-MakeMaker-vmsish, perl-ExtUtils-Manifest, perl-ExtUtils-Miniperl, perl-ExtUtils-Mkbootstrap, perl-ExtUtils-Mksymlists, perl-ExtUtils-Packlist, perl-ExtUtils-testlib, perl-Fatal, perl-Fcntl, perl-Fh, perl-File-Basename, perl-File-CheckTree, perl-File-Compare, perl-File-Copy, perl-File-DosGlob, perl-File-Find, perl-File-Glob, perl-File-Path, perl-File-Spec, perl-File-Spec-Cygwin, perl-File-Spec-Epoc, perl-File-Spec-Functions, perl-File-Spec-Mac, perl-File-Spec-OS2, perl-File-Spec-Unix, perl-File-Spec-VMS, perl-File-Spec-Win32, perl-File-Temp, perl-File-stat, perl-FileCache, perl-FileHandle, perl-Filter-Simple, perl-Filter-Util-Call, perl-FindBin, perl-Getopt-Long, perl-Getopt-Long-Parser, perl-Getopt-Std, perl-Hash-Util, perl-I18N-Collate, perl-I18N-LangTags, perl-I18N-LangTags-Detect, perl-I18N-LangTags-List, perl-I18N-Langinfo, perl-IO, perl-IO-Dir, perl-IO-File, perl-IO-Handle, perl-IO-Pipe, perl-IO-Pipe-End, perl-IO-Poll, perl-IO-Seekable, perl-IO-Select, perl-IO-Socket, perl-IO-Socket-INET, perl-IO-Socket-UNIX, perl-IPC-Msg, perl-IPC-Msg-stat, perl-IPC-Open2, perl-IPC-Open3, perl-IPC-Semaphore, perl-IPC-Semaphore-stat, perl-IPC-SysV, perl-List-Util, perl-Locale-Constants, perl-Locale-Country, perl-Locale-Currency, perl-Locale-Language, perl-Locale-Maketext, perl-Locale-Maketext-Guts, perl-Locale-Maketext-GutsLoader, perl-Locale-Script, perl-MIME-Base64, perl-MIME-QuotedPrint, perl-MM, perl-MY, perl-Math-BigFloat, perl-Math-BigFloat-Trace, perl-Math-BigInt, perl-Math-BigInt-Calc, perl-Math-BigInt-CalcEmu, perl-Math-BigInt-Trace, perl-Math-BigRat, perl-Math-Complex, perl-Math-Trig, perl-Memoize, perl-Memoize-AnyDBM_File, perl-Memoize-Expire, perl-Memoize-ExpireFile, perl-Memoize-ExpireTest, perl-Memoize-NDBM_File, perl-Memoize-SDBM_File, perl-Memoize-Storable, perl-MultipartBuffer, perl-NEXT, perl-NEXT-ACTUAL, perl-NEXT-ACTUAL-DISTINCT, perl-NEXT-ACTUAL-UNSEEN, perl-NEXT-DISTINCT, perl-NEXT-DISTINCT-ACTUAL, perl-NEXT-UNSEEN, perl-NEXT-UNSEEN-ACTUAL, perl-Net-Cmd, perl-Net-Config, perl-Net-Domain, perl-Net-FTP, perl-Net-FTP-A, perl-Net-FTP-E, perl-Net-FTP-I, perl-Net-FTP-L, perl-Net-FTP-dataconn, perl-Net-NNTP, perl-Net-Netrc, perl-Net-POP3, perl-Net-Ping, perl-Net-SMTP, perl-Net-Time, perl-Net-hostent, perl-Net-netent, perl-Net-protoent, perl-Net-servent, perl-O, perl-Opcode, perl-POSIX, perl-POSIX-SigAction, perl-PerlIO, perl-PerlIO-encoding, perl-PerlIO-scalar, perl-PerlIO-via, perl-PerlIO-via-QuotedPrint, perl-Pod-Cache, perl-Pod-Cache-Item, perl-Pod-Checker, perl-Pod-Find, perl-Pod-Functions, perl-Pod-Html, perl-Pod-Hyperlink, perl-Pod-InputObjects, perl-Pod-InputSource, perl-Pod-InteriorSequence, perl-Pod-LaTeX, perl-Pod-List, perl-Pod-Man, perl-Pod-Paragraph, perl-Pod-ParseLink, perl-Pod-ParseTree, perl-Pod-ParseUtils, perl-Pod-Parser, perl-Pod-Perldoc, perl-Pod-Perldoc-BaseTo, perl-Pod-Perldoc-GetOptsOO, perl-Pod-Perldoc-ToChecker, perl-Pod-Perldoc-ToMan, perl-Pod-Perldoc-ToNroff, perl-Pod-Perldoc-ToPod, perl-Pod-Perldoc-ToRtf, perl-Pod-Perldoc-ToText, perl-Pod-Perldoc-ToTk, perl-Pod-Perldoc-ToXml, perl-Pod-PlainText, perl-Pod-Plainer, perl-Pod-Select, perl-Pod-Text, perl-Pod-Text-Color, perl-Pod-Text-Overstrike, perl-Pod-Text-Termcap, perl-Pod-Usage, perl-SDBM_File, perl-Safe, perl-Scalar-Util, perl-Search-Dict, perl-SelectSaver, perl-SelfLoader, perl-Shell, perl-Socket, perl-Storable, perl-Switch, perl-Symbol, perl-Sys-Hostname, perl-Sys-Syslog, perl-Term-ANSIColor, perl-Term-Cap, perl-Term-Complete, perl-Term-ReadLine, perl-Term-ReadLine-Stub, perl-Term-ReadLine-TermCap, perl-Term-ReadLine-Tk, perl-Test, perl-Test-Builder, perl-Test-Builder-Module, perl-Test-Builder-Tester, perl-Test-Builder-Tester-Color, perl-Test-Harness, perl-Test-Harness-Assert, perl-Test-Harness-Iterator, perl-Test-Harness-Iterator-ARRAY, perl-Test-Harness-Iterator-FH, perl-Test-Harness-Point, perl-Test-Harness-Straps, perl-Test-More, perl-Test-Simple, perl-Test-Tester-Tie, perl-Text-Abbrev, perl-Text-Balanced, perl-Text-Balanced-ErrorMsg, perl-Text-Balanced-Extractor, perl-Text-ParseWords, perl-Text-Soundex, perl-Text-Tabs, perl-Text-Wrap, perl-Thread, perl-Thread-Queue, perl-Thread-Semaphore, perl-Tie-Array, perl-Tie-ExtraHash, perl-Tie-File, perl-Tie-File-Cache, perl-Tie-File-Heap, perl-Tie-Handle, perl-Tie-Hash, perl-Tie-Memoize, perl-Tie-RefHash, perl-Tie-RefHash-Nestable, perl-Tie-Scalar, perl-Tie-StdArray, perl-Tie-StdHandle, perl-Tie-StdHash, perl-Tie-StdScalar, perl-Tie-SubstrHash, perl-Time-HiRes, perl-Time-Local, perl-Time-gmtime, perl-Time-localtime, perl-Time-tm, perl-UNIVERSAL, perl-Unicode-Collate, perl-Unicode-Normalize, perl-Unicode-UCD, perl-User-grent, perl-User-pwent, perl-XS-APItest, perl-XS-Typemap, perl-XSLoader, perl-abbrev, perl-attributes, perl-attrs, perl-autouse, perl-base, perl-bigfloat, perl-bigint, perl-bignum, perl-bigrat, perl-blib, perl-bytes, perl-cacheout, perl-charnames, perl-constant, perl-ctime, perl-diagnostics, perl-dumpvar, perl-encoding, perl-exception, perl-fields, perl-filetest, perl-if, perl-integer, perl-less, perl-lib, perl-locale, perl-main, perl-open, perl-ops, perl-overload, perl-pwd, perl-re, perl-sigtrap, perl-sort, perl-strict, perl-subs, perl-syslog, perl-threads, perl-threads-shared, perl-utf8, perl-vars, perl-vmsish, perl-warnings, perl-warnings-register, perl-xsubpp-counter
Section: base
Architecture: noarch
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: d4d71b0a2a372e8e162745ad783ec986
Size: 9211
Filename: basesystem_1.0.4-7.tshtgl.pp_noarch.ipk
Source: basesystem-1.0.4.tar.gz
Description: The skeleton package which defines the system base
Basesystem defines the components of a basic Linux system (for example, the
package installation order to use during bootstrapping). Basesystem should
be the first package installed on a system, and it should never be removed.
Package: bzip2-libs
Version: 1.0.6-1.tshtgl.pp
Depends: libc.so.6, libc.so.6(GLIBC_2.4)
Provides: libbz2.so.1.0
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: e4911e79afe7ad06a473d1b880f188b8
Size: 31447
Filename: bzip2-libs_1.0.6-1.tshtgl.pp_arm.ipk
Description: Libraries for applications using bzip2
Libraries for applications using the bzip2 compression format.
Package: bzip2
Version: 1.0.6-1.tshtgl.pp
Depends: /bin/sh, bzip2-libs(>=1.0.6), libbz2.so.1.0, libc.so.6, libc.so.6(GLIBC_2.4)
Section: misc
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 7f55e73b2157194de61f3e1ff6b03b62
Size: 55152
Filename: bzip2_1.0.6-1.tshtgl.pp_arm.ipk
Source: http://www.bzip.org/1.0.6/bzip2-1.0.6.tar.gz
Description: A file compression utility
Bzip2 is a freely available, patent-free, high quality data compressor. It
compresses files to within 10 to 15 percent of the capabilities of the best
techniques available. However, bzip2 has the added benefit of being approx.
two times faster at compression and six times faster at decompression than
those techniques. Bzip2 is not the fastest compression utility, but it does
strike a balance between speed and compression capability.
Package: chkconfig
Version: 1.3.34-2.tshtgl.pp
Depends: glibc, libc.so.6, libc.so.6(GLIBC_2.4)
Provides: chkconfig.pp
Section: base
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: dc462645b33ce9b2cdc4f042930f5d62
Size: 32449
Filename: chkconfig_1.3.34-2.tshtgl.pp_arm.ipk
Source: chkconfig-1.3.34.tar.gz
Description: A system tool for managing init scripts
Chkconfig is a basic system utility. It queries and updates runlevel
information for system services. Chkconfig manipulates the numerous
symbolic links in /opt/etc/init.d, to relieve system administrators
of some of the drudgery of manually editing the symbolic links.
Package: coreutils
Version: 7.6-1.tshtgl.pp
Depends: libacl.so.1, libacl.so.1(ACL_1.0), libattr.so.1, libattr.so.1(ATTR_1.1), libc.so.6, libc.so.6(GLIBC_2.4), libcap.so.2, libcrypt.so.1, libcrypt.so.1(GLIBC_2.4), libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), libgmp.so.3, libm.so.6, libm.so.6(GLIBC_2.4), librt.so.1, librt.so.1(GLIBC_2.4)
Provides: /opt/bin/env, libstdbuf.so
Section: base
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: a017089d6eba9e9910e8969680d24d67
Size: 2222841
Filename: coreutils_7.6-1.tshtgl.pp_arm.ipk
Source: http://ftp.gnu.org/gnu/coreutils/coreutils-7.6.tar.gz
Description: The GNU core utilities
This package contains the GNU core utilities: a set of tools commonly used
in shell scripts. This package is the combination of the old GNU fileutils,
sh-utils, and textutils packages.
Package: curl
Version: 7.16.4-2.tshtgl.pp
Depends: libc.so.6, libc.so.6(GLIBC_2.4), libcurl(>=7.16.4), libcurl.pp, libcurl.so.4, libz.so.1, zlib
Provides: curl.pp
Section: web
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: a4a59a5c6a0f6ee811c1a1f04114d543
Size: 172625
Filename: curl_7.16.4-2.tshtgl.pp_arm.ipk
Source: http://curl.haxx.se/download/curl-7.16.4.tar.bz2
Description: A utility for getting files from remote servers
cURL is a tool for getting files from FTP, HTTP, Gopher, Telnet, and Dict
servers, using any of the supported protocols. cURL is designed to work
without user interaction or any kind of interactivity. cURL offers many
useful capabilities, like proxy support, user authentication, FTP upload,
HTTP post, and file transfer resume.
Package: db4-utils
Version: 4.6.21-3.tshtgl.pp
Depends: db4(>=4.6.21), libc.so.6, libc.so.6(GLIBC_2.4), libdb-4.6.so, libpthread.so.0, libpthread.so.0(GLIBC_2.4)
Section: admin
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: ae94cef3a824b8d6d7d000eb526915be
Size: 92349
Filename: db4-utils_4.6.21-3.tshtgl.pp_arm.ipk
Description: Command line tools for Berkeley DB
This package contains the command line tools for managing Berkeley DB databases.
Package: db4
Version: 4.6.21-3.tshtgl.pp
Depends: libc.so.6, libc.so.6(GLIBC_2.4), libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), libm.so.6, libpthread.so.0, libpthread.so.0(GLIBC_2.4), libstdc++.so.6, libstdc++.so.6(CXXABI_1.3), libstdc++.so.6(GLIBCXX_3.4)
Provides: libdb-4.6.so, libdb_cxx-4.6.so
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: f03feec013b5122290bf76ca91173840
Size: 1060052
Filename: db4_4.6.21-3.tshtgl.pp_arm.ipk
Source: http://download.oracle.com/berkeley-db/db-4.6.21.tar.gz
Description: The Berkeley DB database library for C
The Berkeley Database (Berkeley DB) is a programmatic toolkit that provides
embedded database support for traditional and client/server applications.
The Berkeley DB includes B+tree, Extended Linear Hashing, Fixed and Variable-
length record access methods, transactions, locking, logging, shared memory
caching, and database recovery.
Package: expat
Version: 2.0.1-2.tshtgl.pp
Depends: glibc, libc.so.6, libc.so.6(GLIBC_2.4), libgcc_s.so.1, libgcc_s.so.1(GCC_3.5)
Provides: expat.pp, libexpat.so.1
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: c70e9895c31c180d1851d0c953ad2625
Size: 95516
Filename: expat_2.0.1-2.tshtgl.pp_arm.ipk
Source: http://dl.sourceforge.net/sourceforge/expat/expat-2.0.1.tar.gz
Description: A XML parsing library
Expat is a C library for parsing XML, written by James Clark. It is a
stream oriented XML parser. This means that you register handlers with
the parser prior to starting the parse. These handlers are called when
the parser discovers the associated structures in the document being
parsed. A start tag is an example of the kind of structures for which
you may register handlers.
Package: flex
Version: 2.5.34-2.tshtgl.pp
Depends: glibc, libc.so.6, libc.so.6(GLIBC_2.4), libm.so.6, libm.so.6(GLIBC_2.4)
Provides: flex.pp
Section: misc
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: 728360b884269503e9abaed2a319a5c7
Size: 195481
Filename: flex_2.5.34-2.tshtgl.pp_arm.ipk
Source: http://dl.sourceforge.net/sourceforge/flex/flex-2.5.34.tar.bz2
Description: A tool for creating scanners (text pattern recognizers)
The flex program generates scanners. Scanners are programs which
can recognize lexical patterns in text. Flex takes pairs of regular
expressions and C code as input and generates a C source file as
output. The output file is compiled and linked with a library to
produce an executable. The executable searches through its input for
occurrences of the regular expressions. When a match is found, it
executes the corresponding C code. Flex was designed to work with
both Yacc and Bison, and is used by many programs as part of their
build process.
Package: gdb
Version: 6.8-1.tshtgl.pp
Depends: /bin/sh, libc.so.6, libc.so.6(GLIBC_2.4), libdl.so.2, libdl.so.2(GLIBC_2.4), libexpat.so.1, libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), libm.so.6, libm.so.6(GLIBC_2.4), libncurses.so.5, libthread_db.so.1, libthread_db.so.1(GLIBC_2.4), libtinfo.so.5
Provides: /opt/bin/gdb, /opt/bin/gdbserver
Section: admin
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 54ee8e2b87eaafb5cf5538732e020fc1
Size: 4127475
Filename: gdb_6.8-1.tshtgl.pp_arm.ipk
Source: ftp://ftp.gnu.org/gnu/gdb/gdb-6.8.tar.bz2
Description: A GNU source-level debugger
GDB, the GNU debugger, allows you to debug programs written in C, C++,
Java, and other languages, by executing them in a controlled fashion
and printing their data.
Package: glib2
Version: 2.14.2-2.tshtgl.pp
Depends: glibc, libc.so.6, libc.so.6(GLIBC_2.4), libdl.so.2, libdl.so.2(GLIBC_2.4), libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), libpcre.so.0, libpthread.so.0, libpthread.so.0(GLIBC_2.4), librt.so.1, librt.so.1(GLIBC_2.4), pcre
Provides: glib2.pp, libglib-2.0.so.0, libgmodule-2.0.so.0, libgobject-2.0.so.0, libgthread-2.0.so.0
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: 566c39769337886889b734617fb96792
Size: 618753
Filename: glib2_2.14.2-2.tshtgl.pp_arm.ipk
Source: ftp://ftp.gtk.org/pub/glib/2.14/glib-2.14.2.tar.bz2
Description: A library of handy utility functions
GLib is the low-level core library that forms the basis for projects such
as GTK+ and GNOME. It provides data structure handling for C, portability
wrappers, and interfaces for such runtime functionality as an event loop,
threads, dynamic loading, and an object system.
Package: glib
Version: 1.2.10-3.tshtgl.pp
Depends: glibc, libc.so.6, libc.so.6(GLIBC_2.4), libdl.so.2, libdl.so.2(GLIBC_2.4), libpthread.so.0, libpthread.so.0(GLIBC_2.4)
Provides: glib.pp, libglib-1.2.so.0, libgmodule-1.2.so.0, libgthread-1.2.so.0
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: e7935e07ddb6b714419fc0bc11fa66fb
Size: 130969
Filename: glib_1.2.10-3.tshtgl.pp_arm.ipk
Source: ftp://ftp.gtk.org/pub/gtk/v1.2/glib-1.2.10.tar.gz
Description: A library of handy utility functions
GLib is the low-level core library that forms the basis for projects such
as GTK+ and GNOME. It provides data structure handling for C, portability
wrappers, and interfaces for such runtime functionality as an event loop,
threads, dynamic loading, and an object system.
Package: gmp
Version: 4.3.2-1.tshtgl.pp
Depends: libc.so.6, libc.so.6(GLIBC_2.4), libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), libm.so.6, libstdc++.so.6, libstdc++.so.6(CXXABI_1.3), libstdc++.so.6(GLIBCXX_3.4)
Provides: libgmp.so.3, libgmpxx.so.4, libmp.so.3
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 131e36508be1661b6455df5fd0216bde
Size: 251735
Filename: gmp_4.3.2-1.tshtgl.pp_arm.ipk
Source: ftp://ftp.gnu.org/gnu/gmp/gmp-4.3.2.tar.bz2
Description: A GNU arbitrary precision library
GNU MP is a library for arbitrary precision arithmetic, signed integers
operations, rational numbers and floating point numbers. It is designed
for speed, for both small and very large operands. GNU MP is fast because
it uses fullwords as the basic arithmetic type, it uses fast algorithms,
it carefully optimizes assembly code for many CPUs' most common inner
loops, and it generally emphasizes speed over simplicity/elegance in its
operations.
Package: gnupg
Version: 1.4.7-2.tshtgl.pp
Depends: /bin/sh, bzip2-libs, glibc, libbz2.so.1.0, libc.so.6, libc.so.6(GLIBC_2.4), libcap, libcap.so.1, libcurl, libcurl.so.4, libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), libncurses.so.5, libreadline.so.5, libresolv.so.2, libresolv.so.2(GLIBC_2.4), libz.so.1, ncurses, readline, zlib
Provides: gnupg.pp
Section: misc
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: 4581005df20aa17789fb08ac9cd0affe
Size: 724314
Filename: gnupg_1.4.7-2.tshtgl.pp_arm.ipk
Source: ftp://ftp.gnupg.org/gcrypt/gnupg/gnupg-1.4.7.tar.bz2
Description: A GNU utility for secure communication and data storage
GnuPG (GNU Privacy Guard) is a utility for encrypting data and creating
digital signatures. GnuPG has advanced key management capabilities and
is compliant with the proposed OpenPGP Internet standard RFC2440. Since
GnuPG doesn't use any patented algorithm, it is not compatible with any
version of PGP2 (PGP2.x uses only IDEA for symmetric-key encryption,
which is patented worldwide).
Package: gnutls
Version: 1.6.3-2.tshtgl.pp
Depends: glibc, libc.so.6, libc.so.6(GLIBC_2.4), libcap.so.1, libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), libgcrypt, libgcrypt.so.11, libgcrypt.so.11(GCRYPT_1.2), libgpg-error.so.0, libm.so.6, libncurses.so.5, libnsl.so.1, libreadline.so.5, libstdc++.so.6, libstdc++.so.6(CXXABI_1.3), libstdc++.so.6(GLIBCXX_3.4), libz.so.1, ncurses, readline, zlib
Provides: gnutls.pp, libgnutls-extra.so.13, libgnutls-extra.so.13(GNUTLS_1_2), libgnutls-openssl.so.13, libgnutls.so.13, libgnutls.so.13(GNUTLS_1_3), libgnutlsxx.so.13, libgnutlsxx.so.13(GNUTLS_1_5)
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: 852d32bd3df8c433260f082d7082534b
Size: 524834
Filename: gnutls_1.6.3-2.tshtgl.pp_arm.ipk
Source: ftp://ftp.gnutls.org/pub/gnutls/gnutls-1.6.3.tar.bz2
Description: A TLS implementation
GnuTLS is a project that aims to develop a library which provides a secure
layer, over a reliable transport layer. Currently it implements the proposed
standards by the IETF's TLS working group.
Package: grep
Version: 2.5.4-1.tshtgl.pp
Depends: libc.so.6, libc.so.6(GLIBC_2.4), libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), libpcre.so.0
Section: text
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 76c7f93e7578be0180867fb62653c77f
Size: 201842
Filename: grep_2.5.4-1.tshtgl.pp_arm.ipk
Source: ftp://ftp.gnu.org/gnu/grep/grep-2.5.4.tar.bz2
Description: The GNU versions of grep pattern matching utilities
This package contains the GNU versions of commonly used grep utilities.
Grep searches through textual input for lines which contain a match to
a specified pattern and then prints the matching lines.
Package: ipkg
Version: 0.99.163-3.tshtgl.pp
Depends: /bin/sh, glibc, libc.so.6, libc.so.6(GLIBC_2.4), wget
Provides: ipkg.pp, libipkg.so.0, update-alternatives
Section: base
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: e52d452b1b3e1775ea76e91c58ea8ae1
Size: 107571
Filename: ipkg_0.99.163-3.tshtgl.pp_arm.ipk
Source: http://www.handhelds.org/download/packages/ipkg/ipkg-0.99.163.tar.gz
Description: The Itsy Package Management System
iPKG is a very lightweight package management system. It was designed for Linux
installations with severe storage limitations such as handheld computers. iPKG
is more than just an embedded Linux flash image builder (although it does that
fairly well). It also allows for dynamic installation/removal of packages on a
running system.
Package: ipkgbuild
Version: 0.7.6-2.tshtgl.pp
Depends: /bin/bash, /bin/sh, /usr/bin/awk, /usr/bin/perl, bzip2, coreutils, grep, patch
Provides: ipkgbuild.pp
Section: admin
Architecture: noarch
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: df7002705346f12621e9e4461078aa3e
Size: 161923
Filename: ipkgbuild_0.7.6-2.tshtgl.pp_noarch.ipk
Source: ftp://ftp.pramberger.at/software/projects/ipkgbuild-0.7.6.tar.gz
Description: A tool to build IPKG packages
ipkgbuild is a tool to build packages for the IPKG Package Manager.
Package: less
Version: 409-2.tshtgl.pp
Depends: /bin/bash, /opt/bin/env, glibc, libc.so.6, libc.so.6(GLIBC_2.4), libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), libncurses.so.5, libtinfo.so.5, ncurses
Provides: less.pp
Section: text
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: ff8d6db0de06b691dda89ba55b77c5af
Size: 148040
Filename: less_409-2.tshtgl.pp_arm.ipk
Source: http://www.greenwoodsoftware.com/less/less-409.tar.gz
Description: A text file browser similar to more
The less utility is a text file browser that resembles more, but has more
capabilities. Less allows you to move backwards in the file as well as
forwards. Since less doesn't have to read the entire input file before it
starts, less starts up more quickly than text editors (for example, vi).
Package: libacl
Version: 2.2.51-1.tshtgl.pp
Depends: libattr.so.1, libattr.so.1(ATTR_1.0), libc.so.6, libc.so.6(GLIBC_2.4)
Provides: libacl.so.1, libacl.so.1(ACL_1.0), libacl.so.1(ACL_1.1), libacl.so.1(ACL_1.2)
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 97ad4260fbe5bfb18c9248b6f4aff86d
Size: 13303
Filename: libacl_2.2.51-1.tshtgl.pp_arm.ipk
Description: A dynamic library for access control list support
This package contains the libacl.so dynamic library which contains the
POSIX 1003.1e draft standard 17 functions for manipulating access control
lists.
Package: libadns-progs
Version: 1.4-2.tshtgl.pp
Depends: libadns(>=1.4), libadns.pp, libadns.so.1, libc.so.6, libc.so.6(GLIBC_2.4)
Provides: libadns-progs.pp
Section: admin
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: a86f32a9fc1838e8827c65f73b3cfcc6
Size: 21382
Filename: libadns-progs_1.4-2.tshtgl.pp_arm.ipk
Description: Related programs for GNU adns
This package contains a collection of useful DNS resolver utilities.
Package: libadns
Version: 1.4-2.tshtgl.pp
Depends: glibc, libc.so.6, libc.so.6(GLIBC_2.4)
Provides: libadns.pp, libadns.so.1
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: e218e9dc9926939b880a6ec79bcde482
Size: 50654
Filename: libadns_1.4-2.tshtgl.pp_arm.ipk
Source: ftp://ftp.chiark.greenend.org.uk/users/ian/adns/adns-1.4.tar.gz
Description: The GNU asynchronous DNS resolver library
GNU adns is an advanced, easy to use and asynchronous-capable resolver library
for C programs.
Package: libattr
Version: 2.4.46-1.tshtgl.pp
Depends: libc.so.6, libc.so.6(GLIBC_2.4)
Provides: libattr.so.1, libattr.so.1(ATTR_1.0), libattr.so.1(ATTR_1.1), libattr.so.1(ATTR_1.2)
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 5aed157b03aed143bcfb16ebffaa62b7
Size: 6714
Filename: libattr_2.4.46-1.tshtgl.pp_arm.ipk
Description: A dynamic library for extended attribute support
This package contains the libattr.so dynamic library which contains the
extended attribute system calls and library functions.
Package: libcap
Version: 2.19-1.tshtgl.pp
Depends: libc.so.6, libc.so.6(GLIBC_2.4)
Provides: libcap.so.2
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: ba47338d6174840a38c2a04fb47aa146
Size: 23075
Filename: libcap_2.19-1.tshtgl.pp_arm.ipk
Source: http://www.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/libcap-2.19.tar.gz
Description: Library for getting and setting POSIX.1e capabilities
libcap is a library for getting and setting POSIX.1e (formerly POSIX 6) draft
15 capabilities.
Package: libcurl
Version: 7.16.4-2.tshtgl.pp
Depends: glibc, libc.so.6, libc.so.6(GLIBC_2.4), libcrypto.so.0.9.8, libdl.so.2, libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), libssl.so.0.9.8, libz.so.1, openssl, zlib
Provides: libcurl.pp, libcurl.so.4
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: c36572b49e36755e8d0a469464ebd602
Size: 199062
Filename: libcurl_7.16.4-2.tshtgl.pp_arm.ipk
Source: http://curl.haxx.se/download/curl-7.16.4.tar.bz2
Description: Libraries for applications using cURL
Libraries for applications using cURL.
Package: libevent
Version: 1.4.14b-1.tshtgl.pp
Depends: libc.so.6, libc.so.6(GLIBC_2.4), libnsl.so.1, libresolv.so.2, librt.so.1, librt.so.1(GLIBC_2.4)
Provides: libevent-1.4.so.2, libevent_core-1.4.so.2, libevent_extra-1.4.so.2
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 6b5bd034f397bc725265ce60a51f4045
Size: 91442
Filename: libevent_1.4.14b-1.tshtgl.pp_arm.ipk
Source: http://monkey.org/~provos/libevent-1.4.14b-stable.tar.gz
Description: An event notification library
Libevent provides an API to execute a callback function when a specific event
occurs on a file descriptor or after a timeout has been reached. Furthermore,
it also support callbacks due to signals or regular timeouts. It is meant to
replace the event loop found in event driven network servers. Currently, it
supports /dev/poll, kqueue, select, poll and epoll. It also has experimental
support for real-time signals. Libevent allows for portable application deve-
lopment and provides the most scalable event notification mechanism available
on an operating system.
Package: libgcrypt
Version: 1.2.4-2.tshtgl.pp
Depends: glibc, libc.so.6, libc.so.6(GLIBC_2.4), libcap, libcap.so.1, libgpg-error, libgpg-error.so.0, libnsl.so.1
Provides: libgcrypt.pp, libgcrypt.so.11, libgcrypt.so.11(GCRYPT_1.2)
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: 170cecde167ff9f491d6ae70185b2b42
Size: 191986
Filename: libgcrypt_1.2.4-2.tshtgl.pp_arm.ipk
Source: ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-1.2.4.tar.gz
Description: A general-purpose cryptography library
Libgcrypt is a general purpose crypto library based on the code used in GNU
Privacy Guard. This is a development version.
Package: libgpg-error
Version: 1.4-2.tshtgl.pp
Depends: glibc, libc.so.6, libc.so.6(GLIBC_2.4)
Provides: libgpg-error.pp, libgpg-error.so.0
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: c47de27d8c53e2ec0243819af1e04e9a
Size: 36807
Filename: libgpg-error_1.4-2.tshtgl.pp_arm.ipk
Source: ftp://ftp.gnupg.org/gcrypt/libgpg-error/libgpg-error-1.4.tar.gz
Description: The GnuPG common error library
This is a library that defines common error values for all GnuPG components.
Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt, pinentry, SmartCard
Daemon and possibly more in the future.
Package: libmemcache
Version: 1.4.0-0.rc2.2.tshtgl.pp
Depends: glibc, libc.so.6, libc.so.6(GLIBC_2.4)
Provides: libmemcache.pp, libmemcache.so.0
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: a61aca65800bc823ecd3437d7bf156c6
Size: 49257
Filename: libmemcache_1.4.0-0.rc2.2.tshtgl.pp_arm.ipk
Source: http://people.freebsd.org/~seanc/libmemcache/libmemcache-1.4.0.rc2.tar.bz2
Description: An API in C to memcached (memory cache daemon)
Libmemcache is a C API to memcached, a high-performance, distributed memory
object caching system.
Package: libmhash
Version: 0.9.9-2.tshtgl.pp
Depends: glibc, libc.so.6, libc.so.6(GLIBC_2.4)
Provides: libmhash.pp, libmhash.so.2
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: ad19be7fa3173e29c03565eaf8c0b2e9
Size: 130226
Filename: libmhash_0.9.9-2.tshtgl.pp_arm.ipk
Source: http://dl.sourceforge.net/sourceforge/mhash/mhash-0.9.9.tar.bz2
Description: A thread-safe hash library
Mhash is a thread-safe hash library implemented in C, and provides a uniform
interface to a large number of hash algorithms. These algorithms can be used
to compute checksums, message digests, and other signatures. The HMAC support
implements the basics for message authentication, following RFC 2104.
Package: libnet
Version: 1.1.4-1.tshtgl.pp
Depends: libc.so.6, libc.so.6(GLIBC_2.4)
Provides: libnet.so.1
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 1c1f06bf32e40421e16efabcaa016c68
Size: 50662
Filename: libnet_1.1.4-1.tshtgl.pp_arm.ipk
Source: http://prdownloads.sourceforge.net/sourceforge/libnet-dev/libnet-1.1.4.tar.gz
Description: A library for portable packet creation and injection
Libnet is an API to help with the construction and handling of network
packets. It provides a portable framework for low-level network packet
writing and handling. Libnet includes packet creation at the IP layer
and at the link layer as well as a host of supplementary functionality.
Libnet is very handy with which to write network tools and network test
code.
Package: libpcap
Version: 1.2.1-1.tshtgl.pp
Depends: libc.so.6, libc.so.6(GLIBC_2.4), libgcc_s.so.1, libgcc_s.so.1(GCC_3.5)
Provides: libpcap.so.1
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 8529958a1d4cf8f15646f277885e80e9
Size: 116809
Filename: libpcap_1.2.1-1.tshtgl.pp_arm.ipk
Source: http://www.tcpdump.org/release/libpcap-1.2.1.tar.gz
Description: A system-independent interface for user-level packet capture
Libpcap provides a portable framework for low-level network monitoring. It
can provide network statistics collection, security monitoring and network
debugging. Since almost every system vendor provides a different interface
for packet capture, the libpcap authors created this system-independent API
to ease in porting and to alleviate the need for several system-dependent
packet capture modules in each application.
Package: libspf2-progs
Version: 1.2.5-2.tshtgl.pp
Depends: libc.so.6, libc.so.6(GLIBC_2.4), libnsl.so.1, libpthread.so.0, libpthread.so.0(GLIBC_2.4), libresolv.so.2, libspf2(>=1.2.5), libspf2.pp, libspf2.so.2
Provides: libspf2-progs.pp
Section: admin
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: a44feca81f4e35b0fc24332d4a45d3b9
Size: 15235
Filename: libspf2-progs_1.2.5-2.tshtgl.pp_arm.ipk
Description: Related programs for Libspf2
This package contains programs for making SPF queries and checking their results
using Libspf2.
Package: libspf2
Version: 1.2.5-2.tshtgl.pp
Depends: glibc, libc.so.6, libc.so.6(GLIBC_2.4), libnsl.so.1, libpthread.so.0, libpthread.so.0(GLIBC_2.4), libresolv.so.2, libresolv.so.2(GLIBC_2.4)
Provides: libspf2.pp, libspf2.so.2
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: 12c8b99d7630cf590af4ec87d1c4f67e
Size: 56735
Filename: libspf2_1.2.5-2.tshtgl.pp_arm.ipk
Source: http://www.libspf2.org/spf/libspf2-1.2.5.tar.gz
Description: The Sender Policy Framework (SPF) library
Libspf2 implements the Sender Policy Framework, a part of the SPF/SRS protocol
pair. Libspf2 is a library which allows email systems such as Sendmail, Postfix,
Exim, Zmailer and MS Exchange to check SPF records and make sure that the email
is authorized by the domain name that it is coming from. This prevents email
forgery, commonly used by spammers, scammers and email worms.
Package: libsrs2
Version: 1.0.18-2.tshtgl.pp
Depends: glibc, libc.so.6, libc.so.6(GLIBC_2.4), libnsl.so.1, libresolv.so.2
Provides: libsrs2.pp, libsrs2.so.0
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: cf099681d8fcf4b727ec395f634aa96a
Size: 20176
Filename: libsrs2_1.0.18-2.tshtgl.pp_arm.ipk
Source: http://www.libsrs2.org/srs/libsrs2-1.0.18.tar.gz
Description: The Sender Rewriting Scheme (SRS) library
Libsrs2 implements the Sender Rewriting Scheme, part of the SPF/SRS protocol
pair. SPF (and related systems) present a challenge to forwarders, since the
envelope sender address might be seen by the destination as a forgery by the
forwarding host. Forwarding services must rewrite the envelope sender address,
while encapsulating the original sender and preventing relay attacks by
spammers. The Sender Rewriting Scheme provides a standard for this rewriting
which makes forwarding compatible with these address verification schemes,
preserves bounce functionality and is not vulnerable to attacks by spammers.
Package: libssh
Version: 0.2-2.tshtgl.pp
Depends: glibc, libc.so.6, libc.so.6(GLIBC_2.4), libcrypto.so.0.9.8, libz.so.1, openssl, zlib
Provides: libssh.pp, libssh.so.2, libssh.so.2(SSH_0.2)
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: d41d3f9d9d2eef471b2a4ee6a1ba7d76
Size: 62749
Filename: libssh_0.2-2.tshtgl.pp_arm.ipk
Source: http://0xbadc0de.be/libssh/libssh-0.2.tgz
Description: A SSH implementation library
Libssh is to be used by programmers needing a working SSH implementation by
the means of a library. The complete control of the client is made by the
programmer. With libssh, you can remotely execute programs, transfer files
and use a secure and transparent tunnel for your remote programs. With its
Secure FTP implementation, you can play with remote files easily, without
third-party programs others than libcrypto (from OpenSSL).
Package: libtool-ltdl
Version: 1.5.26-1.tshtgl.pp
Depends: libc.so.6, libc.so.6(GLIBC_2.4), libdl.so.2, libdl.so.2(GLIBC_2.4)
Provides: libltdl.so.3
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 854b18a5b251984ebab271c3e6fb4ec9
Size: 23357
Filename: libtool-ltdl_1.5.26-1.tshtgl.pp_arm.ipk
Description: The GNU Libtool Dynamic Module Loader
This package contains the GNU Libtool Dynamic Module Loader, a library that
provides a consistent, portable interface which simplifies the process of
using dynamic modules.
Package: libtool
Version: 1.5.26-1.tshtgl.pp
Depends: /bin/sh
Section: admin
Architecture: noarch
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 41e304cc21f49e8838a27d963a63f9be
Size: 718708
Filename: libtool_1.5.26-1.tshtgl.pp_noarch.ipk
Source: http://ftp.gnu.org/gnu/libtool/libtool-1.5.26.tar.gz
Description: The GNU Portable Library Tool
GNU Libtool is a set of shell scripts which automatically configure UNIX and
UNIX-like systems to generically build shared libraries. Libtool provides a
consistent, portable interface which simplifies the process of using shared
libraries.
Package: libupnp
Version: 1.6.0-2.tshtgl.pp
Depends: glibc, libc.so.6, libc.so.6(GLIBC_2.4), libpthread.so.0, libpthread.so.0(GLIBC_2.4)
Provides: libixml.so.2, libthreadutil.so.2, libupnp.pp, libupnp.so.3
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: ac3283e80a02c1099157b5852c616ed5
Size: 121440
Filename: libupnp_1.6.0-2.tshtgl.pp_arm.ipk
Source: http://dl.sourceforge.net/sourceforge/pupnp/libupnp-1.6.0.tar.bz2
Description: A Universal Plug and Play (UPnP) SDK
Libupnp is a portable Universal Plug and Play (UPnP) SDK providing support
for building UPnP-compliant control points, devices, and bridges on Linux.
Package: libusb
Version: 0.1.12-3.tshtgl.pp
Depends: libc.so.6, libc.so.6(GLIBC_2.4), libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), libm.so.6, libstdc++.so.6, libstdc++.so.6(CXXABI_1.3), libstdc++.so.6(GLIBCXX_3.4)
Provides: libusb-0.1.so.4, libusbpp-0.1.so.4
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 85e49f9a0309b27a094ed0d990365889
Size: 31161
Filename: libusb_0.1.12-3.tshtgl.pp_arm.ipk
Source: http://prdownloads.sourceforge.net/libusb/libusb-0.1.12.tar.gz
Description: A library which allows userspace access to USB devices
Libusb is a library which allows userspace application access to USB devices.
Package: lsof
Version: 4.78-2.tshtgl.pp
Depends: glibc, libc.so.6, libc.so.6(GLIBC_2.4)
Provides: lsof.pp
Section: admin
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: 9d63ee35d96e963023d5ccfca8e6a364
Size: 277537
Filename: lsof_4.78-2.tshtgl.pp_arm.ipk
Source: ftp://lsof.itap.purdue.edu/pub/tools/unix/lsof/lsof_4.78_src.tar.gz
Description: A utility which lists open files on a Linux/UNIX system
Lsof stands for LiSt Open Files, and it does just that: it lists information
about files that are open by the processes running on a UNIX system.
Package: make
Version: 3.81-2.tshtgl.pp
Depends: glibc, libc.so.6, libc.so.6(GLIBC_2.4), librt.so.1, librt.so.1(GLIBC_2.4)
Provides: make.pp
Section: admin
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: ec4b42df4b9c0e16a456ac0e841d2371
Size: 143780
Filename: make_3.81-2.tshtgl.pp_arm.ipk
Source: ftp://ftp.gnu.org/gnu/make/make-3.81.tar.bz2
Description: A GNU tool which simplifies the build process for users
Make is a GNU tool for controlling the generation of executables and other
non-source files of a program from the program's source files. Make allows
users to build and install packages without any significant knowledge about
the details of the build process. The details about how the program should
be built are provided for make in the program's makefile.
Package: mpfr
Version: 2.4.2-1.tshtgl.pp
Depends: libc.so.6, libc.so.6(GLIBC_2.4), libgmp.so.3
Provides: libmpfr.so.1
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: ed4227de303de54734eb84b7ea1eae1b
Size: 440695
Filename: mpfr_2.4.2-1.tshtgl.pp_arm.ipk
Source: http://www.mpfr.org/mpfr-current/mpfr-2.4.2.tar.gz
Description: A library for multiple-precision floating-point computations
The MPFR library is a C library for multiple-precision floating-point
computations with correct rounding. MPFR is based on the GMP multiple-
precision library. Its main goal is to provide a library for multiple-
precision floating-point computation which is both efficient and has a
well-defined semantics. It copies the good ideas from the ANSI/IEEE-754
standard for double-precision floating-point arithmetic (53-bit mantissa).
Package: mysql-server
Version: 5.0.95-1.tshtgl.pp
Depends: /bin/bash, /bin/sh, /usr/bin/perl, libc.so.6, libc.so.6(GLIBC_2.4), libcrypt.so.1, libcrypt.so.1(GLIBC_2.4), libcrypto.so.0.9.8, libdl.so.2, libdl.so.2(GLIBC_2.4), libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), libm.so.6, libm.so.6(GLIBC_2.4), libmysqlclient.so.15, libmysqlclient.so.15(libmysqlclient_15), libnsl.so.1, libpthread.so.0, libpthread.so.0(GLIBC_2.4), librt.so.1, libssl.so.0.9.8, libwrap.so.0, libz.so.1, libz.so.1(ZLIB_1.2.0.2), libz.so.1(ZLIB_1.2.3.3), mysql(>=5.0.95), perl-DBI, perl-Data-Dumper, perl-File-Basename, perl-File-Copy, perl-File-Path, perl-File-Temp, perl-Getopt-Long, perl-POSIX, perl-Sys-Hostname, perl-strict, perl-vars, perl-warnings, tcp-wrappers
Section: misc
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 14f633dbbd54ae016d2918085ed66acf
Size: 7939765
Filename: mysql-server_5.0.95-1.tshtgl.pp_arm.ipk
Description: The MySQL server and related files
This package contains the MySQL server and accompanying files and directories.
Package: mysql
Version: 5.0.95-1.tshtgl.pp
Depends: /bin/sh, /usr/bin/perl, libc.so.6, libc.so.6(GLIBC_2.4), libcrypt.so.1, libcrypto.so.0.9.8, libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), libm.so.6, libm.so.6(GLIBC_2.4), libncurses.so.5, libnsl.so.1, libpthread.so.0, libpthread.so.0(GLIBC_2.4), libreadline.so.6, libssl.so.0.9.8, libz.so.1, perl-Exporter, perl-Fcntl, perl-File-Temp, perl-Getopt-Long, perl-IPC-Open3, perl-Sys-Hostname
Provides: libmysqlclient.so.15, libmysqlclient.so.15(libmysqlclient_15), libmysqlclient_r.so.15, libmysqlclient_r.so.15(libmysqlclient_15)
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 0d01da9a0f01556efaa07ac5727c7454
Size: 4438779
Filename: mysql_5.0.95-1.tshtgl.pp_arm.ipk
Source: http://downloads.mysql.com/archives/mysql-5.0/mysql-5.0.95.tar.gz
Description: The MySQL client programs and shared libraries
MySQL is a multi-user and multi-threaded SQL database server. It is a client/
server implementation consisting of a server daemon (mysqld) and many different
client programs and libraries. This package contains the MySQL client programs,
the client shared libraries, and generic MySQL files.
Package: ncurses
Version: 5.9-1.tshtgl.pp
Depends: libc.so.6, libc.so.6(GLIBC_2.4)
Provides: libform.so.5, libmenu.so.5, libncurses.so.5, libpanel.so.5, libtinfo.so.5
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 7c9375d72e3a650c5e89640cd9f5132e
Size: 441522
Filename: ncurses_5.9-1.tshtgl.pp_arm.ipk
Source: ftp://ftp.gnu.org/pub/gnu/ncurses/ncurses-5.9.tar.gz
Description: A terminal handling library
The curses library routines are a terminal-independent method of updating
character screens with reasonable optimization. The ncurses (new curses)
library is a freely distributable replacement for the discontinued 4.4 BSD
classic curses library.
Package: net-tools
Version: 1.60-2.tshtgl.pp
Depends: glibc, libc.so.6, libc.so.6(GLIBC_2.4), libgcc_s.so.1, libgcc_s.so.1(GCC_3.5)
Provides: net-tools.pp
Section: base
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: 152cf4a5473d16c916ce6841078d8d09
Size: 167906
Filename: net-tools_1.60-2.tshtgl.pp_arm.ipk
Source: http://www.tazenda.demon.co.uk/phil/net-tools/net-tools-1.60.tar.bz2
Description: Basic Linux networking tools
This package contains a collection of the basic tools necessary for setting
up networking on a Linux machine. It includes ifconfig, route, netstat, rarp
and various other tools.
Package: openssl
Version: 0.9.8t-1.tshtgl.pp
Depends: /bin/sh, /opt/bin/perl, libc.so.6, libc.so.6(GLIBC_2.4), libdl.so.2, libdl.so.2(GLIBC_2.4), libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), libz.so.1
Provides: libcrypto.so.0.9.8, libssl.so.0.9.8
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 7108ed5bb3ac73eb012a93876063a85c
Size: 1256887
Filename: openssl_0.9.8t-1.tshtgl.pp_arm.ipk
Source: http://www.openssl.org/source/openssl-0.9.8t.tar.gz
Description: The OpenSSL toolkit
The OpenSSL toolkit provides support for secure communications between machines.
It includes a certificate management tool and shared libraries which provide
various cryptographic algorithms and protocols.
Package: patch
Version: 2.5.4-2.tshtgl.pp
Depends: glibc, libc.so.6, libc.so.6(GLIBC_2.4), libgcc_s.so.1, libgcc_s.so.1(GCC_3.5)
Provides: patch.pp
Section: admin
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: 06bb81af19645a84b43a4600ae5856ac
Size: 95343
Filename: patch_2.5.4-2.tshtgl.pp_arm.ipk
Source: ftp://ftp.gnu.org/gnu/patch/patch-2.5.4.tar.gz
Description: The GNU patch command
The patch program applies diff files to originals. The diff command is used
to compare an original to a changed file. Diff lists the changes made to the
file. A person who has the original file can then use the patch command with
the diff file to add the changes to their original file (patching the file).
Package: pciutils
Version: 2.2.6-2.tshtgl.pp
Depends: /bin/sh, glibc, libc.so.6, libc.so.6(GLIBC_2.4), libz.so.1, zlib
Provides: pciutils.pp
Section: admin
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: e1e978fa83665b92a402ed3b37c10f19
Size: 201947
Filename: pciutils_2.2.6-2.tshtgl.pp_arm.ipk
Source: ftp://ftp.kernel.org/pub/software/utils/pciutils/pciutils-2.2.6.tar.gz
Description: PCI bus related utilities
The PCI Utilities are a collection of programs for inspecting and modifying
configuration of PCI devices, all based on a common portable library libpci
which offers access to the PCI configuration space on a variety of operating
systems.
Package: pcre
Version: 8.21-1.tshtgl.pp
Depends: libbz2.so.1.0, libc.so.6, libc.so.6(GLIBC_2.4), libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), libm.so.6, libreadline.so.6, libstdc++.so.6, libstdc++.so.6(CXXABI_1.3), libstdc++.so.6(GLIBCXX_3.4), libtinfo.so.5, libz.so.1
Provides: libpcre.so.0, libpcrecpp.so.0, libpcreposix.so.0
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 50a57a602ebdb890f201db19a44b7e89
Size: 266943
Filename: pcre_8.21-1.tshtgl.pp_arm.ipk
Source: http://prdownloads.sourceforge.net/sourceforge/pcre/pcre-8.21.tar.bz2
Description: Perl-compatible regular expression library
The PCRE library is a set of functions that implement regular expression
pattern matching using the same syntax and semantics as Perl 5. PCRE has
its own native API, in addition to POSIX compatible wrapper functions.
Package: perl-DBD-Pg
Version: 1.49-2.tshtgl.pp
Depends: glibc, libpq.so.5, libssl.so.0.9.8, openssl, perl, perl-DBI, perl-DynaLoader, perl-Exporter, perl-strict, perl-vars, postgresql
Provides: Pg.so, perl-DBD-Pg, perl-DBD-Pg-DefaultValue, perl-DBD-Pg-db, perl-DBD-Pg-dr, perl-DBD-Pg-st, perl-DBD-Pg.pp
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: 7e7ddb03f3a0df437e35880bbc9d2c68
Size: 122691
Filename: perl-DBD-Pg_1.49-2.tshtgl.pp_arm.ipk
Source: http://search.cpan.org/CPAN/authors/id/D/DB/DBDPG/DBD-Pg-1.49.tar.gz
Description: A PostgreSQL interface for perl
DBD::Pg is an implementation of DBI for PostgreSQL for Perl.
Package: perl-DBD-mysql
Version: 4.005-2.tshtgl.pp
Depends: glibc, libcrypt.so.1, libcrypto.so.0.9.8, libm.so.6, libmysqlclient.so.15, libmysqlclient.so.15(libmysqlclient_15), libnsl.so.1, libssl.so.0.9.8, libz.so.1, mysql, openssl, perl, perl-Carp, perl-DBI, perl-DBI-Const-GetInfoType, perl-DynaLoader, perl-strict, perl-vars, zlib
Provides: mysql.so, perl-Bundle-DBD-mysql, perl-DBD-mysql, perl-DBD-mysql-GetInfo, perl-DBD-mysql-db, perl-DBD-mysql-dr, perl-DBD-mysql-st, perl-DBD-mysql.pp
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: dc417a4e30f203c53e764767551e9fbd
Size: 119130
Filename: perl-DBD-mysql_4.005-2.tshtgl.pp_arm.ipk
Source: http://search.cpan.org/CPAN/authors/id/C/CA/CAPTTOFU/DBD-mysql-4.005.tar.gz
Description: A MySQL interface for perl
DBD::mysql is an implementation of DBI for MySQL for Perl.
Package: perl-DBI
Version: 1.58-2.tshtgl.pp
Depends: /opt/bin/perl, glibc, perl, perl-Carp, perl-Config, perl-Cwd, perl-Data-Dumper, perl-DynaLoader, perl-Exporter, perl-Fcntl, perl-File-Spec, perl-Getopt-Long, perl-IO-File, perl-IO-Select, perl-IPC-Open3, perl-Storable, perl-Symbol, perl-UNIVERSAL, perl-base, perl-constant, perl-strict, perl-utf8, perl-vars, perl-warnings
Provides: DBI.so, perl-Bundle-DBI, perl-DBD-DBM, perl-DBD-DBM-Statement, perl-DBD-DBM-Table, perl-DBD-DBM-db, perl-DBD-DBM-dr, perl-DBD-DBM-st, perl-DBD-ExampleP, perl-DBD-File, perl-DBD-File-Statement, perl-DBD-File-Table, perl-DBD-File-db, perl-DBD-File-dr, perl-DBD-File-st, perl-DBD-Gofer, perl-DBD-Gofer-Policy-Base, perl-DBD-Gofer-Policy-classic, perl-DBD-Gofer-Policy-pedantic, perl-DBD-Gofer-Policy-rush, perl-DBD-Gofer-Transport-Base, perl-DBD-Gofer-Transport-null, perl-DBD-Gofer-Transport-pipeone, perl-DBD-Gofer-Transport-stream, perl-DBD-NullP, perl-DBD-Sponge, perl-DBDI, perl-DBI, perl-DBI-Const-GetInfo-ANSI, perl-DBI-Const-GetInfo-ODBC, perl-DBI-Const-GetInfoReturn, perl-DBI-Const-GetInfoType, perl-DBI-DBD, perl-DBI-DBD-Metadata, perl-DBI-FAQ, perl-DBI-Gofer-Execute, perl-DBI-Gofer-Request, perl-DBI-Gofer-Response, perl-DBI-Gofer-Transport-Base, perl-DBI-Gofer-Transport-pipeone, perl-DBI-Gofer-Transport-stream, perl-DBI-Profile, perl-DBI-ProfileData, perl-DBI-ProfileDumper, perl-DBI-ProfileDumper-Apache, perl-DBI-ProfileSubs, perl-DBI-SQL-Nano, perl-DBI-SQL-Nano-Statement_, perl-DBI-SQL-Nano-Table_, perl-DBI-Util-_accessor, perl-DBI-common, perl-DBI.pp
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: faef54e5d60434925b8217d3f101fb3d
Size: 708619
Filename: perl-DBI_1.58-2.tshtgl.pp_arm.ipk
Source: http://search.cpan.org/CPAN/authors/id/T/TI/TIMB/DBI-1.58.tar.gz
Description: A database access API for Perl
DBI is a database access Application Programming Interface (API) for the Perl
Language. The DBI API Specification defines a set of functions, variables and
conventions that provide a consistent database interface independent of the
actual database being used.
Package: pkgconfig
Version: 0.22-2.tshtgl.pp
Depends: glib2, glibc, libc.so.6, libc.so.6(GLIBC_2.4), libglib-2.0.so.0
Provides: pkgconfig.pp
Section: misc
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: c9a9e83445a990f9c510e785b94c34bf
Size: 57395
Filename: pkgconfig_0.22-2.tshtgl.pp_arm.ipk
Source: http://pkgconfig.freedesktop.org/releases/pkg-config-0.22.tar.gz
Description: A tool for determining compilation options
The pkgconfig tool determines compilation options. For each required library,
it reads the configuration file and outputs the necessary compiler and linker
flags.
Package: popt
Version: 1.10-2.tshtgl.pp
Depends: glibc, libc.so.6, libc.so.6(GLIBC_2.4)
Provides: libpopt.so.0, popt.pp
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: 4434411b6efa5b71a2ac67039d45e1c2
Size: 17718
Filename: popt_1.10-2.tshtgl.pp_arm.ipk
Source: popt-1.10.tar.gz
Description: A C library for parsing command line parameters
Popt is a C library for parsing command line parameters. Popt was heavily
influenced by the getopt() and getopt_long() functions, but it improves on
them by allowing more powerful argument expansion. Popt can parse arbitrary
argv[] style arrays and automatically set variables based on command line
arguments. Popt allows command line arguments to be aliased via config files
and includes utility functions for parsing arbitrary strings into argv[]
arrays using shell-like rules.
Package: postfix
Version: 2.4.16-1.tshtgl.pp
Depends: /bin/bash, /bin/sh, gdb, libc.so.6, libc.so.6(GLIBC_2.4), libcrypto.so.0.9.8, libdb-4.6.so, libnsl.so.1, libnsl.so.1(GLIBC_2.4), libpcre.so.0, libresolv.so.2, libresolv.so.2(GLIBC_2.4), libssl.so.0.9.8
Provides: /opt/sbin/sendmail
Section: net
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 1ce925d415aeffbb0911a1901b522d0c
Size: 3613130
Filename: postfix_2.4.16-1.tshtgl.pp_arm.ipk
Source: ftp://ftp.porcupine.org/mirrors/postfix-release/official/postfix-2.4.16.tar.gz
Description: The Postfix Mail Transport Agent
Postfix is a Mail Transport Agent (MTA), supporting LDAP, SMTP AUTH (SASL),
TLS and more.
Package: postgresql-contrib
Version: 8.2.23-1.tshtgl.pp
Depends: libc.so.6, libc.so.6(GLIBC_2.4), libcrypt.so.1, libcrypt.so.1(GLIBC_2.4), libcrypto.so.0.9.8, libdl.so.2, libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), libm.so.6, libm.so.6(GLIBC_2.4), libpq.so.5, libreadline.so.6, libssl.so.0.9.8, libtinfo.so.5, libz.so.1, postgresql-server(>=8.2.23)
Provides: autoinc.so, earthdistance.so, insert_username.so, int_aggregate.so, isn.so, lib_int.so.0, libadminpack.so.0, libbtree_gist.so.0, libchkpass.so.0, libcube.so.0, libdblink.so.0, libfuzzystrmatch.so.0, libhstore.so.0, libltree.so.0, libpg_buffercache.so.0, libpg_freespacemap.so.0, libpg_trgm.so.0, libpgcrypto.so.0, libpgrowlocks.so.0, libpgstattuple.so.0, libseg.so.0, libsslinfo.so.0, libtsearch2.so.0, lo.so, moddatetime.so, refint.so, tablefunc.so, timetravel.so
Section: misc
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: f2528503f9dd025bada93ccaa4db1430
Size: 473720
Filename: postgresql-contrib_8.2.23-1.tshtgl.pp_arm.ipk
Description: Contributed source and binaries distributed with PostgreSQL
This package contains user contributed software that are included in the
PostgreSQL distribution.
Package: postgresql-pl
Version: 8.2.23-1.tshtgl.pp
Depends: libc.so.6, libc.so.6(GLIBC_2.4), libcrypt.so.1, libcrypt.so.1(GLIBC_2.4), libdl.so.2, libdl.so.2(GLIBC_2.4), libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), libm.so.6, libm.so.6(GLIBC_2.4), libnsl.so.1, libpthread.so.0, libpthread.so.0(GLIBC_2.4), libpython2.5.so.1.0, libutil.so.1, postgresql-server(>=8.2.23)
Provides: libplperl.so.0, libplpython.so.0
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: d1ec241e158b00460cbaa9452bbd5184
Size: 509163
Filename: postgresql-pl_8.2.23-1.tshtgl.pp_arm.ipk
Description: The PL procedural languages for PostgreSQL
This package contains the PL/Perl and PL/Python procedural languages for
the PostgreSQL backend. PL/Pgsql is part of the core server package.
Package: postgresql-server
Version: 8.2.23-1.tshtgl.pp
Depends: /bin/bash, /bin/sh, libc.so.6, libc.so.6(GLIBC_2.4), libcrypt.so.1, libcrypt.so.1(GLIBC_2.4), libcrypto.so.0.9.8, libdl.so.2, libdl.so.2(GLIBC_2.4), libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), libm.so.6, libm.so.6(GLIBC_2.4), libpq.so.5, libreadline.so.6, libssl.so.0.9.8, libtinfo.so.5, libz.so.1, postgresql(>=8.2.23)
Provides: libascii_and_mic.so.0, libcyrillic_and_mic.so.0, libeuc_cn_and_mic.so.0, libeuc_jp_and_sjis.so.0, libeuc_kr_and_mic.so.0, libeuc_tw_and_big5.so.0, liblatin2_and_win1250.so.0, liblatin_and_mic.so.0, libplpgsql.so.1, libutf8_and_ascii.so.0, libutf8_and_big5.so.0, libutf8_and_cyrillic.so.0, libutf8_and_euc_cn.so.0, libutf8_and_euc_jp.so.0, libutf8_and_euc_kr.so.0, libutf8_and_euc_tw.so.0, libutf8_and_gb18030.so.0, libutf8_and_gbk.so.0, libutf8_and_iso8859.so.0, libutf8_and_iso8859_1.so.0, libutf8_and_johab.so.0, libutf8_and_sjis.so.0, libutf8_and_uhc.so.0, libutf8_and_win.so.0
Section: misc
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: b04d330bb1efeac6afac1f8fbc7809a1
Size: 2929999
Filename: postgresql-server_8.2.23-1.tshtgl.pp_arm.ipk
Description: The PostgreSQL server and related files
This package contains the PostgreSQL server and accompanying files and
directories.
Package: postgresql
Version: 8.2.23-1.tshtgl.pp
Depends: libc.so.6, libc.so.6(GLIBC_2.4), libcrypt.so.1, libcrypt.so.1(GLIBC_2.4), libcrypto.so.0.9.8, libdl.so.2, libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), libm.so.6, libm.so.6(GLIBC_2.4), libpthread.so.0, libpthread.so.0(GLIBC_2.4), libreadline.so.6, libssl.so.0.9.8, libtinfo.so.5, libz.so.1, libz.so.1(ZLIB_1.2.3.3)
Provides: libecpg.so.5, libecpg_compat.so.2, libpgtypes.so.2, libpq.so.5
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: efecc9ba3c61d6d16afdac82b0f1acd1
Size: 958995
Filename: postgresql_8.2.23-1.tshtgl.pp_arm.ipk
Source: ftp://ftp.postgresql.org/postgresql/source/v8.2.23/postgresql-8.2.23.tar.bz2
Description: The PostgreSQL client programs and shared libraries
PostgreSQL is an advanced Object-Relational database management system (DBMS)
that supports almost all SQL constructs (including transactions, subselects
and user-defined types and functions). This package contains client programs
and libraries that you'll need to access a PostgreSQL DBMS server.
Package: procps
Version: 3.2.8-1.tshtgl.pp
Depends: libc.so.6, libc.so.6(GLIBC_2.4), libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), libncurses.so.5, libtinfo.so.5
Provides: libproc-3.2.8.so, libproc-3.2.8.so(_3_2_5)
Section: base
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 8af1e712a65455ebfbc93f0c7a6cdba9
Size: 219665
Filename: procps_3.2.8-1.tshtgl.pp_arm.ipk
Source: http://procps.sourceforge.net/procps-3.2.8.tar.gz
Description: System and process monitoring utilities
The procps package contains a set of system utilities that provide system
information. Procps includes ps, free, skill, pkill, pgrep, snice, tload,
top, vmstat, w, watch and others.
Package: psmisc
Version: 22.8-1.tshtgl.pp
Depends: libc.so.6, libc.so.6(GLIBC_2.4), libtinfo.so.5
Section: admin
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: ffd3e6f365a808bf646dc4d1d6c531c0
Size: 51192
Filename: psmisc_22.8-1.tshtgl.pp_arm.ipk
Source: http://downloads.sourceforge.net/project/psmisc/psmisc/22.8/psmisc-22.8.tar.gz
Description: Utilities for managing processes on your system
The psmisc package contains utilities for managing processes on your system:
pstree, killall and fuser. The pstree command displays a tree structure of
all of the running processes on your system. The killall command sends a
specified signal (SIGTERM if nothing is specified) to processes identified
by name. The fuser command identifies the PIDs of processes that are using
specified files or filesystems.
Package: pth
Version: 2.0.7-2.tshtgl.pp
Depends: glibc, libc.so.6, libc.so.6(GLIBC_2.4), libgcc_s.so.1, libgcc_s.so.1(GCC_3.5)
Provides: libpth.so.20, pth.pp
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: 39ae8cbd1591f84a5845ccd9e374b0ed
Size: 91236
Filename: pth_2.0.7-2.tshtgl.pp_arm.ipk
Source: ftp://ftp.gnu.org/gnu/pth/pth-2.0.7.tar.gz
Description: The GNU Portable Threads
Pth is a very portable POSIX/ANSI-C based library for Unix platforms which
provides non-preemptive priority-based scheduling for multiple threads of
execution (aka "multithreading") inside event-driven applications. The thread
scheduling itself is done in a cooperative way, i.e. the threads are managed
by a priority- and event-based non-preemptive scheduler. Additionally Pth
provides an optional emulation API for POSIX.1c threads ("Pthreads") which
can be used for backward compatibility to existing multithreaded applications.
Package: python
Version: 2.5.6-1.tshtgl.pp
Depends: /bin/sh, libbz2.so.1.0, libc.so.6, libc.so.6(GLIBC_2.4), libcrypt.so.1, libcrypt.so.1(GLIBC_2.4), libcrypto.so.0.9.8, libdb-4.6.so, libdl.so.2, libdl.so.2(GLIBC_2.4), libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), libm.so.6, libm.so.6(GLIBC_2.4), libncurses.so.5, libnsl.so.1, libnsl.so.1(GLIBC_2.4), libpanel.so.5, libpthread.so.0, libpthread.so.0(GLIBC_2.4), libreadline.so.6, libsqlite3.so.0, libssl.so.0.9.8, libtinfo.so.5, libutil.so.1, libutil.so.1(GLIBC_2.4), libz.so.1, libz.so.1(ZLIB_1.2.0)
Provides: /opt/bin/python, /opt/bin/python2.5, _bisect.so, _bsddb.so, _codecs_cn.so, _codecs_hk.so, _codecs_iso2022.so, _codecs_jp.so, _codecs_kr.so, _codecs_tw.so, _csv.so, _ctypes_test.so, _curses_panel.so, _cursesmodule.so, _elementtree.so, _functools.so, _hashlib.so, _heapq.so, _hotshot.so, _localemodule.so, _lsprof.so, _multibytecodecmodule.so, _random.so, _socket.so, _sqlite3.so, _ssl.so, _struct.so, _testcapi.so, _weakref.so, array.so, audioop.so, binascii.so, bz2.so, cPickle.so, cStringIO.so, cmath.so, collections.so, cryptmodule.so, datetime.so, dbm.so, fcntl.so, fpectlmodule.so, fpetestmodule.so, grp.so, imageop.so, itertools.so, libpython2.5.so.1.0, linuxaudiodev.so, math.so, mmap.so, nismodule.so, operator.so, ossaudiodev.so, parsermodule.so, pyexpat.so, readline.so, resource.so, rgbimg.so, select.so, spwd.so, strop.so, syslogmodule.so, termios.so, time.so, timingmodule.so, unicodedata.so, zlibmodule.so
Section: admin
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 0a65a0e63d3a4ad4bb535878c8c12d85
Size: 3406722
Filename: python_2.5.6-1.tshtgl.pp_arm.ipk
Source: http://www.python.org/ftp/python/2.5.6/Python-2.5.6.tar.bz2
Description: An interpreted, interactive, object-oriented programming language
Python is an interpreted, interactive, object-oriented programming language
often compared to Tcl, Perl, Scheme or Java. Python includes modules, classes,
exceptions, very high level dynamic data types and dynamic typing. Python
supports interfaces to many system calls and libraries, as well as to various
windowing systems (X11, Motif, Tk, Mac and MFC).
Package: readline
Version: 6.2-1.tshtgl.pp
Depends: libc.so.6, libc.so.6(GLIBC_2.4)
Provides: libhistory.so.6, libreadline.so.6
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 9a5fca39604a224c3afa66265959fcfb
Size: 151007
Filename: readline_6.2-1.tshtgl.pp_arm.ipk
Source: ftp://ftp.gnu.org/gnu/readline/readline-6.2.tar.gz
Description: A library for editing typed command lines
The Readline library provides a set of functions that allow users to edit
command lines. Both Emacs and vi editing modes are available. The Readline
library includes additional functions for maintaining a list of previously-
entered command lines for recalling and/or editing those lines, and for
performing csh-like history expansion on previous commands.
Package: sharutils
Version: 4.7-1.tshtgl.pp
Depends: /bin/bash, /opt/bin/perl, /opt/bin/tar, libc.so.6, libc.so.6(GLIBC_2.4), libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), perl-File-Temp
Section: admin
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: c4a01c881e50a7786ed33bb97a6a0729
Size: 83525
Filename: sharutils_4.7-1.tshtgl.pp_arm.ipk
Source: ftp://ftp.gnu.org/gnu/sharutils/REL-4.7/sharutils-4.7.tar.bz2
Description: Utilities for packaging and unpackaging shell archives
The sharutils package contains the GNU shar utilities, a set of tools for
encoding and decoding packages of files (in binary or text format) in a
special plain text format called shell archives (shar). This format can
be sent through e-mail (which can be problematic for regular binary files).
Package: sqlite
Version: 3.7.10-1.tshtgl.pp
Depends: libc.so.6, libc.so.6(GLIBC_2.4), libdl.so.2, libdl.so.2(GLIBC_2.4), libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), libpthread.so.0, libpthread.so.0(GLIBC_2.4), libreadline.so.6, libtinfo.so.5
Provides: libsqlite3.so.0
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 69a74625c8f94a83e2c978d42a53f738
Size: 276130
Filename: sqlite_3.7.10-1.tshtgl.pp_arm.ipk
Source: http://www.sqlite.org/sqlite-src-3071000.zip
Description: An embeddable SQL database engine
SQLite is a C library that implements an SQL database engine. A large subset
of SQL92 is supported. A complete database is stored in a single disk file.
The API is designed for convenience and ease of use. Applications that link
against SQLite can enjoy the power and flexibility of an SQL database without
the administrative hassles of supporting a separate database server.
Package: sysinfo2lcd
Version: 1.0.0-2.tshtgl.pp
Depends: /bin/sh, basesystem
Provides: sysinfo2lcd.pp
Section: misc
Architecture: noarch
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: e8d0d6485e60b22004ff3ca1734702c9
Size: 2176
Filename: sysinfo2lcd_1.0.0-2.tshtgl.pp_noarch.ipk
Source: sysinfo2lcd-1.0.0.tar.gz
Description: A LCD system status viewer
Sysinfo2LCD is a system status viewer for the Buffalo TeraStation Live/Pro2
which uses the LCD display in front to display certain system parameters.
Currently it displays the system uptime and load as well as memory/swap and
disk usage.
Package: sysvinit
Version: 2.86-3.tshtgl.pp
Depends: libc.so.6, libc.so.6(GLIBC_2.4)
Section: base
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 140be3ee521ba202bd34c9c1bde2c8c6
Size: 33103
Filename: sysvinit_2.86-3.tshtgl.pp_arm.ipk
Source: ftp://ftp.cistron.nl/pub/people/miquels/sysvinit/sysvinit-2.86.tar.gz
Description: Programs which control basic system processes
This package contains a group of processes that control the very basic
functions of your system.
Note that the init program itself and related programs are not included
since they are already provided by the system.
Package: tar
Version: 1.26-1.tshtgl.pp
Depends: /bin/sh, libc.so.6, libc.so.6(GLIBC_2.4), libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), librt.so.1, librt.so.1(GLIBC_2.4)
Provides: /opt/bin/rmt, /opt/bin/tar
Section: misc
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 055b062796b118714d531eb0b0713904
Size: 404798
Filename: tar_1.26-1.tshtgl.pp_arm.ipk
Source: http://ftp.gnu.org/gnu/tar/tar-1.26.tar.gz
Description: A GNU file archiving program
The GNU tar program saves many files together in one archive and can restore
individual files (or all of the files) from that archive. It can also be used
to add supplemental files to an archive and to update or list files in the
archive. Tar includes multivolume support, automatic archive compression, the
ability to perform remote archives and the ability to perform incremental and
full backups.
Package: tcp-wrappers
Version: 7.6-2.tshtgl.pp
Depends: glibc, libc.so.6, libc.so.6(GLIBC_2.4)
Provides: /opt/etc/hosts.allow, /opt/etc/hosts.deny, /opt/sbin/tcpd, libwrap.so.0, tcp-wrappers.pp
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: ac47b828a5db317575f96704d4d8c250
Size: 71756
Filename: tcp-wrappers_7.6-2.tshtgl.pp_arm.ipk
Source: ftp://ftp.porcupine.org/pub/security/tcp_wrappers_7.6-ipv6.4.tar.gz
Description: A security tool which acts as a wrapper for TCP daemons
The tcp-wrappers package provides small daemon programs which can monitor
and filter incoming requests for systat, finger, FTP, telnet, rlogin, rsh,
exec, tftp, talk and other network services.
Package: tcpdump
Version: 4.2.1-1.tshtgl.pp
Depends: libc.so.6, libc.so.6(GLIBC_2.4), libcrypto.so.0.9.8, libpcap.so.1
Section: net
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 4058105481c4c5df83a740042ffbeff8
Size: 689579
Filename: tcpdump_4.2.1-1.tshtgl.pp_arm.ipk
Source: http://www.tcpdump.org/release/tcpdump-4.2.1.tar.gz
Description: A network traffic monitoring tool
Tcpdump is a command-line tool for monitoring network traffic. It can
capture and display the packet headers on a particular network interface
or on all interfaces. Tcpdump can display all of the packet headers, or
just the ones that match particular criteria.
Package: tcptraceroute
Version: 1.5beta7-5.tshtgl.pp
Depends: libc.so.6, libc.so.6(GLIBC_2.4), libnet.so.1, libpcap.so.1
Section: net
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: fc047eb302b6a13e4537ffe64de9ab7c
Size: 36001
Filename: tcptraceroute_1.5beta7-5.tshtgl.pp_arm.ipk
Source: http://michael.toren.net/code/tcptraceroute/tcptraceroute-1.5beta7.tar.gz
Description: A traceroute implementation using TCP packets
Tcptraceroute is a traceroute implementation using TCP SYN packets,
instead of the more traditional UDP or ICMP ECHO packets. In doing
so, it is able to trace through many common firewall filters.
Package: twonkymedia-sup
Version: 1.0.0-2.tshtgl.pp
Depends: /bin/bash, basesystem
Provides: twonkymedia, twonkymedia-sup.pp
Section: extras
Architecture: noarch
Maintainer: Peter Pramberger <peter.pramberger@member.fsf.org>
MD5Sum: 2818229523222fc3a3f94f68c33a65bd
Size: 2804
Filename: twonkymedia-sup_1.0.0-2.tshtgl.pp_noarch.ipk
Source: twonkymedia.init
Description: The TwonkyVision Media Server supplement
TwonkyMedia is a fast and feature-rich Media Server developed by TwonkyVision,
which is available for many different platforms and interworks with a large
variety of client devices including XBox 360 and Sony PSP.
Due to license restrictions which deny any third-party binary distribution, we
can only provide an init script and a install helper script. Use this install
script and the downloaded package from the TwonkyVision home page to install
TwonkyMedia on your NAS.
Package: unfs3
Version: 0.9.22-1.tshtgl.pp
Depends: /bin/bash, libc.so.6, libc.so.6(GLIBC_2.4)
Provides: nfs-server
Section: net
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: a7185de8092edb578aafcbcfaa67177b
Size: 71395
Filename: unfs3_0.9.22-1.tshtgl.pp_arm.ipk
Source: http://dl.sourceforge.net/sourceforge/unfs3/unfs3-0.9.22.tar.gz
Description: A user-space NFSv3 server
UNFS3 is a user-space implementation of the NFSv3 server specification.
It provides a daemon for the MOUNT and NFS protocols, which are used by
NFS clients for accessing files on the server.
Package: usbutils
Version: 0.86-1.tshtgl.pp
Depends: /bin/bash, /bin/sh, libc.so.6, libc.so.6(GLIBC_2.4), libusb-0.1.so.4, libz.so.1
Section: admin
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 0a1000d9a0daea492f61747d3daf04e8
Size: 301506
Filename: usbutils_0.86-1.tshtgl.pp_arm.ipk
Source: http://downloads.sourceforge.net/project/linux-usb/usbutils/usbutils-0.86.tar.gz
Description: Linux USB utilities
This package contains utilities for inspecting devices connected to a USB bus.
Package: wget
Version: 1.13.4-1.tshtgl.pp
Depends: libc.so.6, libc.so.6(GLIBC_2.4), libcrypto.so.0.9.8, libdl.so.2, libgcc_s.so.1, libgcc_s.so.1(GCC_3.5), librt.so.1, librt.so.1(GLIBC_2.4), libssl.so.0.9.8, libz.so.1
Section: web
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 0dd379a5b7fa9c2c2708914ca6aa83d9
Size: 234796
Filename: wget_1.13.4-1.tshtgl.pp_arm.ipk
Source: http://ftp.gnu.org/pub/gnu/wget/wget-1.13.4.tar.bz2
Description: A file retrieval utility using the HTTP or FTP protocols
GNU Wget is a file retrieval utility which can use either the HTTP or FTP
protocols. Wget features include the ability to work in the background while
you are logged out, recursive retrieval of directories, file name wildcard
matching, remote file timestamp storage and comparison, use of Rest with FTP
servers and Range with HTTP servers to retrieve files over slow or unstable
connections, support for Proxy servers, and configurability.
Package: zlib
Version: 1.2.6-1.tshtgl.pp
Depends: libc.so.6, libc.so.6(GLIBC_2.4), libgcc_s.so.1, libgcc_s.so.1(GCC_3.5)
Provides: libz.so.1, libz.so.1(ZLIB_1.2.0), libz.so.1(ZLIB_1.2.0.2), libz.so.1(ZLIB_1.2.0.8), libz.so.1(ZLIB_1.2.2), libz.so.1(ZLIB_1.2.2.3), libz.so.1(ZLIB_1.2.2.4), libz.so.1(ZLIB_1.2.3.3), libz.so.1(ZLIB_1.2.3.4), libz.so.1(ZLIB_1.2.3.5), libz.so.1(ZLIB_1.2.5.1), libz.so.1(ZLIB_1.2.5.2)
Section: libs
Architecture: arm
Maintainer: Peter Pramberger <peterpramb@member.fsf.org>
MD5Sum: 1e74532fd11c852a6b1cddb5cc2b7bab
Size: 79327
Filename: zlib_1.2.6-1.tshtgl.pp_arm.ipk
Source: http://www.zlib.net/zlib-1.2.6.tar.gz
Description: The zlib compression and decompression library
Zlib is a general-purpose, patent-free, lossless data compression library which
is used by many different programs.